Paravan PR 35 User Manual Download

Page: 62 / 164

Gener

Information

epar
e

Oper
ate

Help

Technology

Driving with the PR 35

11.

Driving with the PR 35

11.1

Insurance, liability insurance

We recommend that you speak with your insurance advisor before starting to use the PR 35 so that its use is

included in your insurance – in particular in your liability insurance.

Please note that within the context of applicable legal provisions, a legal requirement may exist to

insure the PR 35 during use in road traffic.

WARNING

Danger of injury

for persons operating a PR 35 which does not

correspond to the original or delivered condition.

Material damage

to the PR 35 through the use of unapproved

parts or incorrectly installed parts.

Do not make any technical modifications to the power

wheelchair.

Only operate the PR 35 in its original or delivered condition.

Use only original and approved replacement parts.

Check the operating condition of the PR 35 before each trip.

Summary of Contents for PR 35





































































































































































Search results

Summary of Contents for PR 35

Reviews:

Related manuals for PR 35

Brands by name

Popular brands

Paravan PR 35, User Manual

Search results

Summary of Contents for PR 35

Reviews:

Related manuals for PR 35

Brands by name

Popular brands