Paravan PR 35 User Manual Download Page 120

Page: 120 / 164

Gener

Information

epar
e

Oper
ate

Help

Technology

Maintenance and servicing

120

16.

Maintenance and servicing

Do not use a high-pressure cleaner to clean the PR 35. Avoid contact of the electronics with water.

However, in order to guarantee its perfect functioning, the PR 35 must nonetheless:

be handled with care,

be kept clean,

be serviced periodically on an annual basis.

16.1

Service partner

If problems occur, please contact your medical supply store or your dealer, or PARAVAN GmbH directly.

In order to have maintenance work carried out, please contact your medical supply store or your

dealer, or PARAVAN GmbH directly. Maintenance and servicing works must only be carried out by

trained persons.

Summary of Contents for PR 35





































































































































































Search results

Summary of Contents for PR 35

Reviews:

Related manuals for PR 35

Brands by name

Popular brands

Paravan PR 35, User Manual

Search results

Summary of Contents for PR 35

Reviews:

Related manuals for PR 35

Brands by name

Popular brands