Paravan PR 35 User Manual Download

Page: 49 / 164

Gener

Information

epar

Oper

ate

Help

Technology

Handover of the PR 35

Handover of the PR 35

8.1

Receiving your new PR 35

Check your PR 35 for completeness and compare the items received in the delivery with your order

documents. If anything is unclear, contact PARAVAN GmbH immediately!

Check (visually inspect) that the PR 35 is in proper condition. Report damage which can be attributed to

delivery or transport immediately and in writing to your

dealer, forwarding agent or medical supply store

and

PARAVAN GmbH.

8.2

How the PR 35 is supplied to you

The PR 35 is supplied to you in the following ready to drive and ready to operate condition:

Fully assembled and with equipment corresponding to your specifications upon ordering.

All attachments and control elements are preset to your body measurements in accordance with the order.

Precharged storage batteries.

Summary of Contents for PR 35





































































































































































Search results

Summary of Contents for PR 35

Reviews:

Related manuals for PR 35

Brands by name

Popular brands

Paravan PR 35, User Manual

Search results

Summary of Contents for PR 35

Reviews:

Related manuals for PR 35

Brands by name

Popular brands