Paravan PR 35 User Manual Download

Page: 128 / 164

Gener

Information

epar
e

Oper
ate

Help

Technology

Troubleshooting

128

Error message

Meaning

Brake error / Bremsen

This message appears when the control system detects a problem with the magnetic

brakes or their connections.

Check the magnetic brakes, cables and connections in the control system.

Check that the motor brakes have not come uncoupled.

Motor error / Motorfehler

This message appears when the control system detects that the connection to a mo-

tor has been interrupted.

Check the motors, cables and connections in the control system.

Gone to sleep / Ruhemo-

dus

This message appears when the control system has been inactive for longer than the

[time] period defined by the “SleepTimer” parameter.

Gyro disconnected / Gyro ni. angeschl

This message appears when the control system detects that the gyro module is no

longer connected.

Reconnect the gyro module and restart the system.

Bad cable / Kabelfehler

This message appears when the control system detects an error in the cabling that

enables the modules to communicate with one another.

Check whether the cables or connections have been interrupted or squashed/jammed.

If there is any visible damage to the cables, replace them and switch the control unit

off and on again. Please speak to customer service about any replacements you may

need.

Summary of Contents for PR 35





































































































































































Search results

Summary of Contents for PR 35

Reviews:

Related manuals for PR 35

Brands by name

Popular brands

Paravan PR 35, User Manual

Search results

Summary of Contents for PR 35

Reviews:

Related manuals for PR 35

Brands by name

Popular brands