background image

16

Once you see the setup menu on your TV screen you can make  
selections or adjustments with the D 3 remote handset’s  ,  ,  ,   
cursor buttons and central 

ENTER button

. You only need to move 

your thumb a short distance to press any of these five buttons and 
you’ll soon know which button you’re pressing without having to look 
at the remote. The setup process will go much faster when you are 
focused on the Setup menu on your TV, without having to look at 
which remote button you’re pressing. 
Actual adjustments or selections on each menu page are made with 
the  ,  ,   and   cursor buttons. Press the   and   cursor buttons 
to select the item in the left column which you wish to adjust. When you select a menu item  
it will be highlighted. Then press the   cursor button to highlight the right column. Use the  

 and   buttons to highlight your selection or adjustment in the right column and then press  

the ENTER button to select it. Press the   cursor button to return to the left column.
After you have made all the selections for that menu 
page, press the   button until EXIT is highlighted. 
When you press the ENTER button to select EXIT,  
the next higher level menu page will reappear.  

Saving Your Setup Selections 

Your settings are automatically saved when  
you press the SETUP button on the remote or  
by pressing the ENTER button when EXIT is  
highlighted on the MAIN MENU.

SETTING UP YOUR D 3 continued

Summary of Contents for Halo D 3





































Reviews: