Parasound Halo D 3, Owner'S Manual, Page: 13 / 36

13
POWER UP YOUR D 3
After your D 3 is connected to the rest of your home theater system you are ready for its
shake-down cruise. Select the TV’s Input for its Input jacks which you connected to the
D 3’s Video Out jacks.
- Press the D 3’s rear panel
Master AC Power switch to its On position. You should now
notice a very faint blue glow behind its On-Off button and a red glow behind its P logo badge.
- Press the On-Off button on the front panel to turn the D 3 on: the P logo will glow brighter,
blue will glow around all the buttons, and the front-panel display will light up.
- You can now press the LOAD button and insert a DVD into the exposed loading tray.
A few seconds after you press the PLAY button you should see and hear the opening
screens of the movie.
- Once you are confident that the D 3 is properly connected to the rest of your system you
may want to adjust some of the settings in the setup menu. The next section of this manual
is dedicated to the setup menu.
Note: If you don’t see/hear anything now, please recheck your connections and make sure your
TV is on. Check that the TV and surround controller (or AV receiver) selected inputs are the same
as the input jacks which are connected to the D 3.