background image

31

ARE YOU HAVING DIFFICULTY?

Call your Parasound dealer first. If your dealer can’t help you with your problem we  
encourage you to call Parasound’s Technical Service Department, toll-free at 

1-866-770-8324

,  

Monday - Friday, 8am - 4pm Pacific time. We can suggest other diagnostic tests you can easily 
perform. If we determine that your Model D 3 should be returned to Parasound or an Authorized 
Parasound Warranty Center for inspection and possible servicing, we will provide the location 
of a warranty center near you or shipping instructions and a Return Authorization number for its 
return to Parasound.

Before You Return Any Unit to Parasound for Service

Before you send your unit to Parasound, you will need to obtain a specific Return Authorization 
(RA) number and shipping instructions for the D 3 and all of its accessories from Parasound’s 
Technical Department. The RA number must be clearly marked on the outer carton. Use the 
original factory packing materials and arrange adequate insurance to cover its value. You must 
include a copy of your purchase receipt, since this document establishes the validity of this unit’s 
warranty. Warranty repairs are only performed by Parasound or Parasound Authorized warranty 
centers when your purchase receipt is from a Parasound Authorized Dealer or Parasound Autho-
rized Reseller.

Units Will Be Refused by Parasound Under the Following Conditions

1. Unit was sent without the Parasound-assigned RA number marked on the carton.
2. Unit was sent in an unsuitable shipping carton, likely to have been damaged in transit.
3. Unit has inadequate packing, unit likely to have been damaged in transit.
4. Unit was shipped collect for shipping charges. We do not accept collect shipments.
5. Unit was shipped via the US Postal Service.
6. Unit was sent to an address other than the address instructed by our Technical Department.

Note:

 The shipping address is not the same as Parasound’s office address.

Warranty Repair

Read your accompanying Parasound Limited Warranty carefully to understand the applicable rights 
and limitations. This section provides instructions for obtaining repairs, both for units covered 
under the Parasound Limited Warranty and for units or situations which are outside the Warranty.

Note:

 The D 3 warranty period is shorter than the Parasound Limited Warranty for other models.

Unit is not eligible for repair under the terms of the Parasound warranty if:

1. Unit was not purchased from a Parasound Authorized Dealer or Parasound Authorized Reseller.
2. You are not the original owner. The warranty is not transferable.
3. Unit’s serial number was removed, modified, or defaced.
4. Unit shows evidence of abuse and/or misuse.
5. Unit was modified in any way.
6. A prior repair was attempted by an unauthorized repair station.

Licensing Patent Acknowledgements

Manufactured under license from Dolby Laboratories. ”Dolby,“ ”Pro Logic“, and the double-D 
symbol are trademarks of Dolby Laboratories. Manufactured under license from Digital Theater 
Systems, Inc. US Pat. No. 5,451,942, 5,956,674, 5,974,380, 5,978,762 and other worldwide pat-
ents issued and pending. ”DTS,“ ”DTS-ES Extended Surround,“ and ”Neo:6“ are trademarks of 
Digital Theater Systems, Inc. Copyright 1996, 2000, Theater Systems, Inc. All Rights Reserved. 
The HDMI logo and High-Definition Multimedia Interface are trademarks of HDMI Licensing LLC. 
Some technology used in this disc player is protected under U.S. patent numbers 4,631,603; 
4,577,216; 4,819,098; 4,907,093; 5,315,448; 6,516,132.

Summary of Contents for Halo D 3





































Reviews: