background image

26

CHROMA DELAY

This adjusts the delay between the video brightness signal and the video color signal  
information of an image. If the luminence (Y) connecting cable is significantly longer than the 
chroma (C) cable the luma information will arrive later than the chroma information, causing  
poor picture quality. CHROMA DELAY can be adjusted from -2 to +2.

ENHANCE V (vertical)

The vertical enhancer will enhance the vertical transitions in the luma, sharpening the vertical 
detail to produce a more lifelike picture. This can be adjusted in a range of 0 to 11. Its effects are 
very subtle and might not be visible with many DVDs.

ENHANCE H (horizontal)

The horizontal enhancer will enhance the horizontal luma, and horizontal chroma, sharpening the 
horizontal details. This can be adjusted in a range of 0 to 11. Its effects are very subtle and might 
not be visible with many DVDs.

DIGITAL NR (Noise Reduction) 

This feature can help remove noise from the picture, resulting in a cleaner image without 
“snow.” The settings are OFF, AUTO, LOW, MID and HIGH. We encourage you to experiment 
with the settings. In many cases the image quality will be clear enough without Digital NR.

DEFAULT? 

This will reset all of the settings under the CUSTOM VIDEO SETUP to the factory defaults.

Note:

 Don’t forget to select the USER option on the PRESET SELECT setup page or your custom 

video adjustments will not take effect.

PRESET SELECT

On this setup page you can select 5 different video 
“presets.” Each preset will have a slightly different  
effect on your image. Based on your TV and your  
personal preference you may wish to experiment  
with these different settings.

NONE 

This maintains the factory default settings. This is  
equivalent to setting all of the adjustments on the  
CUSTOM VIDEO SETUP page to 0.

EASY VIEW

This makes the picture bright, but slightly more diffused, with softer edges. 

FILM-LIKE

This gives a movie film character to the picture.

MOST VIVID

This makes shapes and colors stand out boldly with the most contrast; it is especially enjoyable 
for sporting events. 

USER

This will activate the settings made on the CUSTOM VIDEO SETUP page.

SETTING UP YOUR D 3 — ADVANCED continued

Summary of Contents for Halo D 3





































Reviews: