ADVANCED CONNECTIONS, SETUP & CONTROL continued
IR Input Connections
The
IR Input jacks
are 1/8” (3.5mm) mini jacks that connect to an IR (infrared) repeater system.
Repeater systems relay IR commands from your remote control handset to extend its range and
enable it to control your 7100 when it is behind closed cabinet doors or to control it from a sec-
ond room, remote Zone B. Both IR Input jacks perform the same function so they can be
connected to multiple IR repeaters.
Note:
Locate the IR repeater receiver so that the IR beam from your remote control handset
cannot also reach the 7100, otherwise, the 7100 may not respond correctly to the
remote’s
commands. When positioning the IR repeater’s receiver remember that infrared can be
reflected like visible light.
Note:
The 7100 IR inputs require an “amplified IR block” which are accessories for IR repeater
systems. Here is a recommended example:
http://www.etherealhometheater.com/product.php?cat=3&main=26&id=476
Connecting a Second Entertainment Zone
The 7100 allows you to feed separate audio or audio-video programs to another area, or Zone B,
in your home. To feed video and audio to the second remote zone, connect a video cable with
RCA plugs to the
Composite Video Out - Zone jack
and a pair of audio cables to one of the
Audio Zone Out Variable jacks
. The Zone audio output is always stereo (unless you are playing
a monophonic source). When you select a source for this output, the display on the 7100 may
briefly show whatever other listening mode that source was last used with but will revert to show
“Stereo” almost immediately.
54
Expansion Port
For Future Technologies
Made In Finland
Manufactured under license from
Dolby Laboratories. “Dolby,”
“Pro Logic,” and the double-D
symbol are trademarks of Dolby
Laboratories.
Manufactured under license from Digital Theater
Systems, Inc. US Pat. No. 5,451,942, 5,956,674,
5,974,380, 5,978,762 and other world-wide patents
issued and pending. "DTS", "DTS-ES Extended
Surround" and Neo:6" are trademarks of Digital
Theater Systems, Inc. Copyright 1996, 2000 Digital
Theater Systems, Inc. All rights Reserved.
To Prevent Fire Or Shock
Hazard, Do Not Expose This
Unit To Rain Or Moisture.
To Prevent Electric Shock,
Do Not Remove Top Cover.
No User-Serviceable Parts
Inside. Refer Servicing To
Qualified Service Personnel.
CAUTION:
WARNING:
Power Consumption:
65W
Source-Digital Audio
Use Menu to assign to Source-Audio Inputs
Output
DVD
DVD
VCR
SAT
In 5
SAT
L
R
VCR
In 4
Optical 1
Optical 2 Optical 3 Optical 4
Optical
In 5
In 6
Record Out
Zone Out
Source-Audio Inputs
Source-S-Video Inputs
DVD
SAT
Fixed
Variable
VCR
Serial Port
Main On
Master Off
1
2
Ctr
Ctr
In 4
In 6
In 4
Front
1 Program 2
12V Trigger Event
RS-232 Control
Surround
Sub
Back
Front
Surround
Sub
Back
7.1 Channel Analog Audio Inputs
AC Power
Coax 1
Coax 2
Coax 3
Coax 4
100V-240V
50Hz-60Hz
AC
L
R
Main Audio Outputs
IR inputs
Manufactured under license from THX Ltd.
THX and Ultra2 are trademarks of THX Ltd.
which may be registered in some jurisdictions.
All right reserved.
Source-Composite Video Inputs
Zone
Composite Video Outputs
S-Video Outputs
Main
Main
Main
Main
Main
Main
Main
Use Menu to assign to Source-Audio Inputs
Source-Component Video Inputs
1
2
3
Pb
Y
Pr
Pb
Y
Pr
Output
AC Voltage Selector On Bottom
In
Out
Zamp V.3 Zone Amplifier
Parasound Products, Inc.
San Francisco, CA USA
L-
L+
R-
R+
R
L
In
Zamp v.3
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
115V
/230V
60Hz
/50Hz
5W
3A
Fuse
Only
Auto On
Man
Audio
Sens
Use
R
In
12V
Level
R
L
Gnd Lift
Loop
Loop
Mono St
REMOTE ZONE
AMPLIFIED BLOCK
IR
REPEATER
RECEIVER
ZONE AMPLIFIER
