INTERMEDIATE SETUP continued
When you have changed the first character to the one you want, press the remote’s
right cursor
button
to advance the temporary vertical
^
cursor to the next character. When you have completed
the new title, press the
ENTER button
to end the titling set up. You can also simply press the
right cursor button
past the seventh character title to end the titling set up.
Note:
To change titles using the 7100 front panel alone, turn the knob to change the letter that’s
underlined on the panel display, and press the front-panel
Menu button
to advance to
the next letter. The display shows only upper-case [capital] letters, even when lower-case
letters are selected, but that won’t matter unless you hook up a video screen later for
on-screen display; if you want to keep track of this, remember that the capital letters come
first in the character list, followed by the lower-case alphabet, then the punctuation marks,
then the numbers, and finally back to the upper-case letters.)
Remember, that if you change DVD, SAT and VCR to other titles, the remote buttons for these
inputs will still show 1/DVD, 2/SAT, 3/VCR.
Digital inputs:
The 7100 has eight digital audio inputs, four coaxial (“Coax”) RCA-style jacks and four optical jacks.
These are independent of the analog audio input jacks. Digital audio inputs must therefore be
“assigned” to sources numbers or titles so they are selected whenever you select that source.
This means that you can match any digital input with any of the six analog source inputs or any
of the four digital-only source inputs on the 7100. If you have an input that will use only an analog
audio source, you can also decline having any digital input associated with it.
SOURCE SETUP
DIGITAL:
OFF
By pressing the
right
and
left cursor buttons
, you can associate any (or none) of the eight digital
input jacks with the source you’re currently setting up.
Note:
There are two more digital than analog audio inputs since you might need more optical or
more coaxial digital connections.
Presets:
The “Preset” menu line enables you to play the source you are setting up with any of
five Preset combinations of the following:
•
Sub, Center, Surround channel levels that are higher or lower than calibrated levels
•
Bass and Treble boost or cut, for the front left, center, and right channels only
•
Audio Lipsync delay
These are adjusted by the “Preset setup” submenu under “Audio setup.”
When you select a source that has an associated preset, the preset’s bass and treble settings
replace those made on the main “Audio setup” screen and the subwoofer center, surround, and
level changes are added to, or subtracted from, the levels calibrated and memorized in “Level
setup.” When you adjust tone and speaker level adjustments on the remote they are temporary
level “trims” and will persist as long as the 7100 is set to that input but will be erased from
memory and lost as soon as you change to another input.
If the source is set to “No change” it will use the general (all sources) settings you made in the
“Audio setup” menu rather than the values in the Preset.
44
