USING THE REMOTE CONTROL
The Remote Control’s Main “Page”
Whenever “MAIN” appears, the remote’s buttons control the 7100
functions for your theater or “main” room. The button functions for
main control are one “page.” If another device is displayed, press the
MAIN device button
to control the 7100.
Remote Control Button Labels
•
OFF
and
ON buttons
turn the 7100 off and on if the remote’s
screen displays “MAIN.”
•
OFF
and
ON buttons
turn other devices off and on when they appear in place of “MAIN.”
•
OFF
and
ON buttons
can also be re-programmed to turn your entire system off and on when
the remote is displaying “MAIN”. Refer to the SRC1 manual for detailed instructions.
•
The
VOL +
and
VOL – buttons
can be re-programmed to raise and lower the volume setting
of the 7100, regardless of the current device page. Refer to the SRC1 manual for detailed
instructions.
•
The
MUTE button
turns off the Model 7100 audio outputs in the main area or, if the 7100 is
already muted, pressing the MUTE button un-mutes it.
•
Press the
MENU button
to display the 7100 Setup menu on your TV, in place of whatever
you were watching.
•
The four
cursor thumbpad buttons
navigate the menu. They also select source input in
either of two ways. Pressing the right
>
or left
< button
or pressing the
ENTER button
in
the center of the thumbpad starts or stops Autosearch of all source inputs currently receiving
digital (but not analog) audio input signals.
•
The
1-9
and
0 buttons
are used to select the source you wish to hear and view. The
0 but-
ton
selects Input 10.
Buttons 1, 2, 3
are also labeled DVD, SAT, VCR, because these titles
are preset at the factory.
•
The
THX button
controls THX operation. See page 32 and the Mode Table on pages 33 – 35.
•
Press the
7.1 button
to select the 7.1 channel Analog Audio Input jacks for the multi-channel
analog outputs of DVD-Audio and SACD players, or any future components that perform their
own surround decoding. This is a direct pass-through mode which remains 100% analog for
maximum signal purity.
•
Press the
Mode
^
or
v buttons
to change modes while you’re listening. Modes available for
each type of source are found in the
Mode Table
on pages 33 – 35.
•
Press the
Sub +
and
– buttons
to adjust the subwoofer level while you’re listening. These
temporary “trim” adjustments add to, or subtract from, the Sub level setting you already
calibrated on the
Speaker setup, Level setup
menu page. It’s a convenient way to adjust the
sub level to sound just right for the movie or album you’re currently viewing or watching.
•
Press the
CTR +
and
– buttons
to adjust the center speaker level while you’re listening.
These temporary “trim” adjustments add to, or subtract from, the Center level setting you
already calibrated on the
Speaker setup, Level setup
menu page. It’s a convenient way to
make the dialog more audible for the movie you’re currently viewing.
•
Press the
SURR +
and
– buttons
to adjust the surround channels’ speaker levels while you’re
listening. These temporary “trim” adjustments add to, or subtract from, both the Left surround
and Right surround level settings you already calibrated on the
Speaker setup, Level setup
menu page. It’s a convenient way to adjust the sense of depth in a movie soundtrack, or how
immersed you are in a music album with a surround mode selected.
•
Press the remote’s
STAT (Status) button
switches on the OSD to display the 7100’s main
zone operating status on your TV, in place of the program you are watching. The screen with
status will time out after five seconds and your screen will revert to the normal program. You
can also turn off the status display at any time by pressing the
STAT button
a second time.
There is no OSD for second zone status.
37
MAIN DEVICE button
