USING THE MENU FOR SETUP continued
Setup Menu Using the Remote
Press the
MENU button
on the remote handset.
The main menu will appear.
Note:
The OSD may not appear stable immediately after you press the
Menu button
. This is
because some TVs require a few seconds to synchronize with the 7100’s OSD signal.
Setup Menu Structure
Main Menu
is displayed when you press the
Menu button
on the 7100 (or the
MENU button
on the remote) one time.
Note:
If you press either the unit’s
Menu button
(or the remote’s
MENU button
) while the
menu is displayed, it will cancel the menu and save your setup settings.
Under Main Menu are the six setup category sub-menu pages that are one level lower.
•
Speaker setup
•
Source setup
•
Audio setup
•
THX audio setup
•
Display setup
•
Trigger setup
Each of these pages branches out into even lower levels, with one or two of its own
sub-sub-menu pages. Many consider this arrangement to be sub-lime.
17
MAIN MENU
SPEAKER SETUP
Main Menu
Speaker setup
Source setup
Audio setup
THX Audio setup
Display setup
Trigger setup
Exit
Press the
MENU button
on the
remote handset (above).
On your
TV
it looks like this (left);
this is the
onscreen display (OSD)
On the
front panel of the 7100
it looks like this (below):
MENU
Button
