1. Network Management Specification
42
June 2004
8000-A2-GB30-30
5.3
Paradyne ReachDSL MIB (pdn_reachDSL.mib)
This Paradyne enterprise MIB provides objects for configuration of objects specific to
ReachDSL devices as well as for Spectrum Management objects specific to ReachDSL
products. The various objects supported are shown in the following table.
The ATU-C and ATU-R Tx Rates configurable for a specific Spectrum Zone and EWL are
dependent on the spectrum management guidelines for that specific zone and can be
obtained from the ReachDSL Core specifications as well as from the System Requirements
documents.
5.4
DS1 MIB (RFC 2495)
5.5
Paradyne DS1-EXT MIB (PDN-DS1EXT-MIB).
This Paradyne MIB is an extension to the standard DS1 MIB (RFC 2495). This MIB
provides additional DS1 and G.703 (E1) configuration objects not provided by RFC 2495.
Table 1-33. ReachDSL MIB
Table
Comments
reachDSLSpectrumMgmtSelection
Supported as is
reachDSLSpectrumMgmtConfEntry
Supported as is
reachDSLSpectrumMgmtLoopMeasurementMethod
Supported as is
reachDSLSpectrumMgmtEWLUnits
Supported as is
reachDSLSpectrumMgmtMode
Supported as is
reachDSLSpectrumMgmtLineInfoEntry
Supported as is
reachDSLLineEntry
Supported except for
reachDSLCircuitIdentifier
.
Table 1-34. DS1 MIB
Table
Comments
dsx1ConfigEntry
Supported as is
dsx1CurrentEntry
Supported as is
dsx1IntervalEntry
Supported as is
dsx1TotalEntry
Supported as is
dsx1ChanMappingEntry
Supported as is
dsx1FarEndCurrentEntry
Supported as is
dsx1FarEndIntervalEntry
Supported as is
dsx1FarEndTotalEntry
Supported as is
