Paradyne Hotwire 8620, Reference Manual

Page: 35 / 128

1. Network Management Specification
8000-A2-GB30-30 June 2004
29
4.1.8 “ifOperStatus” Object (ifEntry 8)
This object is used to specify the current operational state of the interface. The value of this
object for each interface will be defined as follows:
Table 1-14. ifAdminStatus
Interface ifAdminStatus
AAL5 Up(1)
ATMUP Up(1)
DSL Up(1), Down(2)
DSLATM Up(1)
DSLChan Up(1)
T1/E1 Up(1), Down(2)
ETH1 Up(1), Down(2)
IMA Up(1), Down(2)
SONET Up(1), Down(2)
SONETPath Up(1), Down(2)
DS3 Up(1), Down(2)
GIGE Up(1), Down(2)
10/100BT Up(1), Down(2)
BRIDGE Up(1)
Table 1-15. ifOperStatus (1 of 2)
Interface ifOperStatus
AAL5 Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
ATMUP Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
DSL Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
DSLATM Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
DSLChan Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
T1/E1 Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
ETH1 Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
IMA Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
SONET Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)
SONETPath Up(1), Down(2), Testing(3), Unknown(4), notPresent(6), lowerLayerDown(7)