Paradyne FrameSaver SLV 9124, Technical Reference

Page: 46 / 346

User Interface and Basic Operation
4-2
9124-A2-GH30-00 June 1999 - Preliminary
Logging On
Start a session using one of the following methods:
H
Telnet session over the COM port via:
— An in-band management channel through the frame relay network.
— A local in-band management channel configured on the DTE port
between the FrameSaver unit and the router.
H
Direct terminal connection over the COM port.
When logging on, the menu-driven user interface screen is blank. Press Return to
activate the interface. One of the following occurs:
H
If no security was set up or security was disabled, the Main Menu screen
appears (see page 4-4). You can begin your session.
H
If security was set up and is enabled, you are prompted for a login. Enter
your login ID and password.
When the user interface has been idle, a session is automatically ended and the
screen goes blank when the unit times out. Press Return to reactivate the
interface.
"
Procedure
To log in when security is being enforced:
1. Enter your assigned Login ID and press Return.
2. Enter your Password and press Return.
— Valid characters – All printable ASCII characters
— Number of characters – Up to 10 characters can be entered in the
Login ID and Password fields
— Case-sensitive – Yes
An asterisk ( * ) appears in the password field for each character entered.