Paradyne FrameSaver SLV 9124, Technical Reference

Page: 316 / 346

SNMP MIBs and Traps, and RMON Alarm Defaults
C-18
9124-A2-GH30-00 June 1999 - Preliminary
Static DLCI Alarm Defaults – NetScout Area
These alarms apply to DLCIs on the network interface. They are created either
during RMON initialization or when a DLCI is created, and put into the
NetScout-defined alarm area.
The thresholds for these alarms can be edited using NetScout Manager Plus so
they match the values in the SLA between the customer and service provider.
See
Editing Alarms in Chapter 6, Using NetScout Manager Plus.
Table D-5. Static DLCI Alarm Defaults – NetScout Area
Item
Sample
Type
1
MIB/Tag/OID
2
Interval
Event
Type
Rising
Threshold
Default Falling
Threshold
Default
Current Latency A MIB: devfrext.mib (E)
Tag: devFrExtLatencyLatest
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9. 4.3.1.7.I.D
60 secs
(1 min) Rising Must be
configured. 0
Average Latency A MIB: devfrext.mib (E)
Tag: devFrExtLatencyAvg
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9. 4.3.1.5.I.D
900 secs
(15 mins) Rising Must be
configured. 0
Frames Received D MIB: FT DTE MIB (RFC 2115)
Tag: frCircuitReceivedFrames
OID: .1.3.6.1.2.1.10.32.2.1.
8.I.D
60 secs
(1 min) Rising Must be
configured. 0
Frames Sent D MIB: FT DTE MIB (RFC 2115)
Tag: frCircuitSentFrames
OID: .1.3.6.1.2.1.10.32.2.1.
6.I.D
60 secs
(1 min) Rising Must be
configured. 0
Tx Frames
Exceeding CIR D MIB: devfrext.mib (E)
Tag: devFrExtDlciTxFrOutCIR
OID: .1.3.6.1.4.1.1795.2.24.2.
6.9. 4.1.1.17.I.D
60 secs
(1 min) Rising Must be
configured. 0
Tx CIR Utilization D MIB: FT DTE MIB (RFC 2115)
Tag: frCircuitSentOctets
OID: .1.3.6.1.2.1.10.32.2.1.
7.I.D
60 secs
(1 min) Rising Must be
configured. 0
1
D = Delta. Indicates that the calculated difference between the current value and the previous value is contained
in the MIB.
A = Absolute. Indicates that the exact value for the item is contained in the MIB.
2
I in the OID = Interface ID of the frame relay link.
D = DLCI number.