Paradyne FrameSaver SLV 9124, Technical Reference

Page: 211 / 346

Security
9-11
9124-A2-GH30-00 June 1999 - Preliminary
Creating a Login
A login ID and password is required if security is enabled.* You can define a
combination of six login/passwords. Each login must be unique and have a
specified access level.
"
Procedure
To create a login ID and password:
1. Follow this menu selection sequence:
Main Menu
→
Control
→
Administer Logins
2. Select New from the function keys area and press Enter.
3. Enter the login ID, password, and security level for each login.
In the field . . . Enter the . . .
Login ID ID of 1 to 10 characters.
Password Password from 1 to 10 characters.
Re-enter password Password again to verify that you entered the
correct password into the device.
Access Level Access level: 1, 2, or 3.
H
Level-1 – User can add, change, and
display configuration options, save, and
perform device testing.
H
Level-2 – User can monitor and perform
diagnostics, display status and
configuration option information.
H
Level-3 – User can only monitor and
display status and configuration screens.
Note: Make sure at least one login is setup for
Level-1 access or you may be inadvertently
locked out.
NOTE:
See Resetting the FrameSaver Unit in Chapter 10, Operation and
Maintenance, should you inadvertently be locked out.
4. Save your changes.
When Save is complete,
Command Complete
appears at the bottom of the
screen and the cursor is repositioned at the Login ID field, ready for another
entry.
See Configuring SNMP NMS Security in Chapter 8, Configuration Options, for
more information about security configuration options.
*
Security is enabled by the Communication Port’s Login Required option. For a Telnet or FTP session, the Telnet or
FTP Session’s Telnet Login Required or FTP Login Required option is also enabled.