Paradyne 3151, Operator'S Manual

Page: 204 / 234

I. Asynchronous Terminal Interface Operation
I-2
March 2001 3150-A2-GB24-10
Initiating an ATI Session
Once the appropriate configuration option changes have been made and access is
established, the Main Menu screen appears (unless a password is required).
Figure I-1, Main Menu Screen , shows the Main Menu screen for a standalone
CSU.
The carrier-mounted CSU shows the 3000 Series carrier slot number under the
Customer ID. The slot number field (e.g., Slot: 1) is changed to access specific
CSUs in the carrier. For Telnet or SNMP access to the carrier, specify the IP
address of the applicable communication port (see
Appendix G,
IP Network
Addressing Scenarios ).
NOTE:
By convention throughout this appendix, examples of screens are shown as
they appear with the standalone CSU.
If a password is required, the Login screen displays the prompt for password input.
(Refer to
Entering a Password to Gain Access on page I-14.)
To move between the Screen area and the Screen Function Keys area ( Figure I-1,
Main Menu Screen ), press Ctrl-a (Control key and a).
From the Screen area, you may select the Status, Test, Configuration, or
Control branches.