EVOHD+ Installation Guide
79
Programmable Output Options
PGM State
S
ECTION
[006]: O
PTION
[1]
NOTE:
The PGM can provide 50mA to any device connected to it.
PGM Deactivation Mode
S
ECTION
[006]: O
PTION
[2]
PGM Base Time
S
ECTION
[006]: O
PTION
[3]
PGM Override
S
ECTION
[006]: O
PTION
[4]
When the PGM override is enabled, the keypad's on-board PGM will ignore PGM Activation Events
,
PGM Deactivation Events
,
and
PGM Timers
(section ). It will remain in its normal state until the PGM Override is disabled. This option may be used to test the PGM connections.
PGM Timer
S
ECTION
[008]
The value programmed in section
[008]
represents how long the PGM will remain in its opposite state after being activated. To program the timer, enter a 3-digit
decimal value (000 to 255) in section
[008]
. Default: 5 seconds
.
PGM Activation Event
S
ECTIONS
[009]
TO
[012]
Enter the sections that correspond to the Event Group, Feature Group, Start # and End # of the PGM and enter the required data.
PGM Deactivation Event
S
ECTIONS
[013]
TO
[016]
If the PGM Deactivation Option is set to follow the PGM Deactivation event, the PGM will return to its normal state when the event programmed in sections
[013]
to
[016] occurs.
Enter the sections that correspond to the Event Group, Feature Group, Start # and End # of the PGM and enter the required data.
K641R Programming
Partition Assignment
S
ECTION
[001]: O
PTIONS
[1]
TO
[8]
To assign the keypad to a partition, enable the option that corresponds to the desired partition.
By default, partitions 1 to 8 are enabled.
Display Access Code Entry
S
ECTION
[003]: O
PTION
[1]
Option
[1]
OFF=Digits are replaced by a “*“(default)
Option
[1]
ON=Access Code digits will be displayed
Display Exit Delay Timer
S
ECTION
[003]: O
PTION
[2]
Option
[2]
OFF=Will not display Exit Delay timer (default)
Option
[2]
ON=LCD screen will display Exit Delay timer
Option
[1]
OFF =
PGM is Normally Open (default)
Option
[1]
ON =
PGM is Normally Closed
Option
[2]
OFF =
Deactivates on PGM Deactivation Event (default)
Option
[2]
ON =
PGM will deactivate according to the PGM Timer
Option
[3]
OFF =
PGM Base Time is 1 second (default)
Option
[3]
ON =
PGM Base Time is 1 minute
Option
[4]
OFF =
PGM Override disabled (default)
Option
[4]
ON =
PGM Override enabled
Event Group
Feature Group
Start #
End #
PGM
[009]
[010]
[011]
[012]
Event Group
Feature Group
Start #
End #
PGM
[013]
[014]
[015]
[016]
Summary of Contents for EVOHD+
Page 1: ...EVOHD Installation Guide High Security Access System...
Page 86: ......