![background image](http://html1.mh-extra.com/html/paradox/evohd/evohd_installation-manual_3654199060.webp)
60
EVOHD+ Installation Guide
Access Codes
Installer Code
S
ECTION
[1000]
(default =
000000
) The Installer Code is six digits in length where each digit can be any value from 0 to 9. To change the Installer Code:
1.
Press and hold
[0]
2.
Enter
[
INSTALLER
CODE
]
3.
Key in
[1000]
4.
Enter new 6-digit
[
INSTALLER
CODE
]
The Installer Code can program the User Code Options and the Partition Assignment, but cannot program the personal identification numbers.
Access Code Length
S
ECTION
[3033]: O
PTIONS
[2]
AND
[3]
Access codes can be 1 to 6 digits in length if flexible user access code is enabled. When programming access codes with less than 6 digits, press the
[
ENTER
]
key after
entering the last digit. The control panel automatically removes the last 2 digits of the user access code if the length is changed from 6 digits to 4 digits. However, if
the user access code length is changed from 4 digits to 6 digits, the control panel adds 2 digits to the end by using the first 2 digits.
System Master Code
S
ECTION
[1001]
(default =
123456
) The Installer Code can change the User Code Options, Partition Assignment and Access Control Options, but cannot change the personal
identification number (PIN). Each digit in the System Master Code can be any value from 0 to 9. To reset the System Master Code, refer to section on page 53. With
the System Master Code, a user can use any of the available arming methods with access to all partitions and can program all user access codes, User Options,
Partition Assignments and Access Control Options.
The minimum number of variations of PIN codes for each user is 1,000,000 when using a 6-digit user code in order to comply with EN 50131-3 Grade 3 compliancy.
Programming Access Codes
S
ECTIONS
[1002]
TO
[1999]
(default =
all options are off except bypass
) The control panel supports 998 user access codes. In sections
[1002]
to
[1999]
, the Installer Code can program the
User Code Options, Partition Assignment and Access Control Options, but cannot program the personal identification numbers (PIN). To program the PINs, refer the
users to the “System Manager’s Manual”. The System Master Code or a user with the Master feature enabled can program the User Code Options, Partition
Assignment, Access Control Options and User Labels using a different method of programming.
NOTE:
If no partition assignment is selected, the user access code will
only
be able to activate PGMs.
To program user labels, refer to the “LCD Keypad System Manager’s Manual”.
User Options
S
ECTIONS
[1002]
TO
[1999]: U
SER
O
PTIONS
S
CREEN
, O
PTIONS
[1]
TO
[8]
The User Options define how each user access code can arm or disarm the partitions. All users can Regular arm their assigned partitions, but only those with the
Arm Only option disabled can disarm an assigned partition.
NOTE:
Enable or disable the options as required for each user access code as shown in
.
[2]
[3]
OFF OFF
4-digit User Access Code (default)
OFF ON
6-digit User Access Code
ON
ON
Flexible User Access Code
Summary of Contents for EVOHD+
Page 1: ...EVOHD Installation Guide High Security Access System...
Page 86: ......