SNMP-NET
19
6. Unable to perform an SNMP get operation.
Solution: Check the SNMP settings stored in the SNMP-NET. The IP Address of the PC you
are using must be entered in one of the SNMP Access Control NMS IP fields, with
Read or Read/Write permission. The Community String on the PC and SNMP-NET
must match.
7. Unable to perform an SNMP set operation.
Solution: Check the SNMP settings stored in the SNMP-NET. The IP Address of the PC you
are using must be entered in one of the SNMP Access Control NMS IP fields, with
Read/Write permission. The Community String on the PC and UPS Adapter must
match.
8. Unable to receive traps at your management station.
Solution: Check the SNMP Trap settings in the SNMP-NET. The IP Address of the PC you are
using must be entered in one of the Target IP fields. The Community String on the PC
and SNMP-NET must match.
9. Forgot the administrator’s account and password.
Solution: Connect the configuration cable in the console port and set both of the DIP-switches of
SNMP-NET to ON position (configuration mode). Type in “rstadmin” while the
account and password are prompted in 30 seconds. Now the account and password
of administrator are reset to default values.
