SNMP-NET
14
UPS Shutdown during Power Crisis
UPS only:
SNMP-NET responds to two different kinds of UPS shutdown events (AC failed, Battery Low).
Go to Configure in the UPS Management menu and Login as an Administrator. Set the options
in UPS Shutdown Action section then press the Submit button.
UPS + Shutdown Software (SNMP-NET Client):
If your SNMP-NET device needs to work with the shutdown software to protect your servers,
which are powered by the UPS then you should clear all of the settings of UPS shutdown action
in the SNMP-NET device. Then set the event shutdown using the shutdown software. And
because the shutdown software will send the control command to UPS through SNMP to
shutdown the UPS, we have to add the server IP address with write permission in the SNMP
Table of SNMP-NET device.
Note:
Once SNMP-NET detects there is shutdown software running the event-driven
shutdown would be cancelled.
Wake Computer Up
Check the BIOS settings and enable the WOL option. Then go to the Wake On LAN page in
the Network menu.
Note:
This feature is only available for the servers in the same LAN with SNMP-NET device.
Email Notification
This page is to setup the email notification settings to receive a notification or a report from
SNMP-NET by email.
1.
SMTP Server Name or IP
This item is the Hostname of a SMTP Mail Server that will be used to send the email
messages from the SNMP-NET. If entering a Hostname, you are also required to enter the
DNS IP in the System Configuration.
2.
Sender Mail Address
This item must be a legitimate email address.
3.
Account
This item is the User Account of Mail Server. It is only required if Mail Server requires
authentication to send mail.
4.
1
st
Receiver
This item is for entering the email address of the individual you will receive the email
notification.
5.
1
st
Event Level
This item is for selecting the Event level of the notification that will be sent to the Mail
Receiver. The Event levels are Information, Warning and Severity.
6.
2
nd
Receiver
This item is for entering the email address of the individual you will receive the email
notification.
7.
2
nd
Event Level
This item is for selecting the Event level of the notification that will be sent to the Mail
Receiver. The Event levels are Information, Warning and Severity.
