SNMP-NET
8
Configuring the SNMP-NET through Telnet
1. Connect the SNMP-NET SNMP card to the network.
2. Prepare a workstation (Microsoft Window, Max OSX or Linux), which is connected to the
same LAN.
3. Set both of the DIP-switches of the SNMP-NET to OFF position (normal mode).
4. From the Windows workstation open a DOS Prompt and type “telnet Host Name or IP” to
open the telnet connection with SNMP-NET. For other operating systems, please run the
OS shell and type the same command as in the DOS prompt.
5. Messages will be displayed on the screen. Key in the administrator account (default
account is
admin
) and password (default password is
password
). The SNMP-NET
configuration main menu will be displayed on the screen. Please refer to the Text Mode
Configuration section for more information.
Note:
SNMP-NET will terminate the telnet connection if there is no data transmission after 1
minute.
Configuration by Text Mode
+========================+
UPS Web Card Main Menu
+========================+
UPS Web Version 1.0
[1]. User Manager
[2]. System Configuration
[3]. SNMP Access Control
[4]. SNMP Trap
[5]. Time Server
[6]. Mail Server
[7]. Wake On LAN
[8]. Upgrade Firmware
[9]. Soft Restart
[a]. Reset All To Default
[b]. Reset Hub To Default
[z]. Exit Without Save
[0]. Save And Exit
Please Enter Your Choice =>1
Figure 2-4
SNMP-NET Main Menu.
