PAR T GOLF DOUBLE EAGLE INSTALLATION AND MAINTENANCE MANUAL
SECTION E ENJOYING YOUR SIMULATOR
E5
AIMING THE CAMERAS
REMINDER:
Each camera is mounted to the Optisense with three adjustment, socket head cap screws. The
angle or direction of each camera can be adjusted by gently turning one or more of these adjustment screws.
NOTE
: While aiming cameras, be careful that nothing interferes with the camera's view.
STEP 4
Aim Near Camera #1
–
_
Place the
golf ball
on Calibration Point #1.
Position ladder over the Tri-Turf on the left side and away from the
infrared shield.
Determine location of
Camera Line
–
Facing the screen, place your open hand on the carpet, 5 to 6 inches on
the Tri-Turf side of Calibration Point #1. Then slide fingertips slowly
toward Calibration Point #1 .
–
When your fingertips cross camera #1’s field of vision, this will be
graphically displayed on the screen.
Drawing 10C
–
Using a golf tee, mark the general location of Camera Line, i.e. the place
camera #1 first sensed your finger.
Drawing 10C Camera Adjustments
