TROUBLESHOOTING IN OPERATION
Symptom
Cause
Solution
Paper is not folded at
proper folding position
The paper folding plate is
not installed properly.
Install the paper folding plate
properly.
S
tatic electricity has occurred
in the paper.
Spray a commercially-
available
air duster on the rubber roll
Paper is double
-fed frequently
The paper separator is dirty
Clean it with alcohol
The sheets of paper are
sticking
to each other
Fan the paper well
Paper jams
frequently
The rubber roll is dirty
Clean it with alcohol
Paper shreds are stuck inside
the paper conveyance
passage
Check inside the machine and
remove any paper shreds
The stacker roller position is
not correct
Adjust the position of the
stacker rollers
The paper is curled
Straighten the paper curl
Static electricity has occurred
in the paper
Spray a commercially-
available air duster on the
rubber roller
Paper slips in the
vertical direction
After a paper type was
changed, a folding position
has not been
Check that the rough
adjustment knob position is
correct
Paper slips in the
Horizontal direction
The paper is stacked unevenly Stack the paper neatly on the
paper feed table
There is space between the
paper and side guide
Set the side guides so that they
push against the paper lightly
Page
14
PaperFolder.com
