INSTALLATION
The Knife 17 Cross Fold System is designed to process legal size paper (11" x 17") or smaller into smaller
cross folded pieces that will fit in small envelopes. It does this by performing to 1 to 5 fan-folds on the
length of the paper on the first machine, followed by a half-fold on the second machine.
It is very easy to set up and operate if you follow these instructions. You will need a sturdy table at
least 4' x 2' able to support up to 200 lbs.
We recommend the
Iceberg Indestructible Too Table 24" x 48" item 65503
or better. You may want
bigger. When set up, the system is in an L shape that measures 40" x 28".
40" wide
28" deep
Start by unpacking and setting up the first machine, the PH-17. Run a few samples to make sure it is
operating properly before combining it with the Knife folder.
UNPACKING THE PH-17
Unpack the machine. Put the machine on a big table. Open the paper Feed Tray. Push the front of
the tray down to load paper.
Open the Cover. Cut any plastic ties.
Page
3
PaperFolder.com
PH-17
Knife
Output
