LOADING PAPER
a. Fan a stack of paper of at least 100 sheets.
b. Load them in the paper tray.
c. Press the front of the tray down to load the paper.
d. Move the side guides to be snug with each side of the stack. It should be centered on the
tray. THIS IS VERY IMPORTANT. IF YOU ARE USING THE KNIFE FOLDER, IT WILL NOT PERFORM
PROPERLY IF THE PAPER IS NOT CENTERED.
POWER
Power to the machine can be 110v, 60 hz or 220v, 50 hz. Plug it into a wall circuit with at least 10A
available. DO NOT USE AN EXTENSION CORD.
Plug the electrical cord in and switch on. O is Off. –– is On.
LCD CONTROL PANEL
BATCH
CLEAR
START STOP
SETTING PAUSE INTERVALS; SPEED ADJUSTMENTS
The PH14 can be set to pause for a set period after one or more folds. There are several situations
where this is handy, such as:
1. SET A PAUSE AFTER A CERTAIN NUMBER OF FOLDS
You want to fold a certain number, and then PAUSE so you can remove that number as a set.
a. Press the CLEAR button.
b. Press the BATCH button repeatedly until the counter shows the number of sheets you want
in the batch).
c. Press the STOP button to save that number.
d. Press the BATCH button until the number of seconds you want for the PAUSE between sets is
shown( 1 to 30, then it recycles)
e. Press the STOP button to set the pause.
f. Press the Start button.
Page
11
PaperFolder.com
