Pantum P1000 Series, Service Manual

Page: 36 / 93

- - 28
2.5.2 Maintenance call display
If there are errors that the user cannot fix, the two red indicators will blink every 250 ms. as shown
below
2.5.3 Control panel button (Delete/Continue button)
The button on the control panel is used for canceling print jobs, continuing paused print jobs and
printing a test page.
The functions of the Delete/Continue button
Printer status Operation Result
Power Saving Mode Press The printer wakes up
Printing Press and hold Cancel the current print job
Error
There is a job
printing
Press and hold Cancel the current print job
Out of paper Load paper
The printer will resume printing
automatically
Mismatched
paper Correct the mismatched
paper error, then press
The printer will resume printing
Other errors No Action
Ready Press and hold Prints a test page
Power Off Press and hold Puts the printer in Debug Mode
Debug Mode Press and hold
Returns the printer to Normal
Mode
Other Condition No Action
.
Debug state, the two red indicators blink every 250
ms.Please contact a service centre or technical personnel
for further maintenance.