Pantum P1000 Series, Service Manual

Page: 32 / 93

- - 24
4) Remove the documents from the output bin then put them into the automatic paper tray with the
back side up and the leading edge (top of the page) feeding into the printer first.
Note: Don’t change the order of the documents when you remove the stack of paper from the
output bin, turn the stack over and put it into the automatic paper tray in the same order
and in the same direction as the stack was removed from the output bin.
5) Click Continue on the Status Monitor.
6) The printer will print the front pages of the document in order on the other side of the
paper.
Using the manual feed slot
1) Load the appropriate media into the manual feed slot before printing. The printer will start in
manual feed mode automatically when you complete this step.
2) Check the Manual Duplex Printing box in the Duplex area. The default setting is unchecked.
3) Click the OK button to close the Properties dialog box, then OK again (or Print from some
applications) to print the document.
4) The printer will start printing all the back pages of the document first. Feed each sheet of media
into the manual feed slot once the previous sheet of media has completely cleared the slot until
all the back pages of the document have been printed.
5) When finished printing the back pages the printer will show a Status Alert on the computer
screen as shown below: