BA_PH_UT300_EN_18-21.docx
14
9
Positioning Parameters
Speed
To specify the
rotary speed of the milling cutter
in the range from 1,500 to 10,000 rpm:
Figure 10: Speed setting for milling cutter
Action Function
Confirmation of the setting
Start milling cutter at new speed ("
Switch on milling cutter
" button)
Remark:
When the spindle is rotating, the speed can only be corrected downwards! The nominal
speed specified when starting the spindle is defined as the "
Software Limit
" and is also displayed in
the "
Speed
" window.
Figure 11
: „Software Limit" in the “speed window”
