BA_PH_UT300_EN_18-21.docx
32
Figure 37: Serial parameter settings 3
Finally click on "
Send
" to send the parameters to the Com-Server.
PLEASE NOTE: The settings are not yet stored in the non-volatile memory.
To save the parameters, proceed as follows:
Figure 38: Save serial parameters
Click "
Back
" to leave the parameter level.
In the following menu click on
„
Logout
“:
Figure 39: Com server logout
You are now in the logoff area. Here you have the possibility to save the configuration you just cre-
ated. Click on the "
Save
" button
“:
Figure 40: save configuration
If the data has been successfully written to the non-volatile memory, you automatically return to the
login screen. The Com server settings are now complete and you can start the parametrization of the
handwheel sensor.
