BA_PH_690-200_EN_11-22.docx
62
20.4.6
Setting Degrees & Intermediate Degrees
•
Loosen the clamping lever (
1
).
•
Then turn the cross-cut fence (
L
) and approach the desired angular dimension on the grid scale via the
slotted hole for length compensation
→
Let it engage at the corresponding angular position.
•
Tighten the clamping lever (
1
) again.
20.5
Cross-Cut & Mitre Fence Super Gehrfix II
The combined cross-cut fence and mitre fence "Super Gehrfix II" enables precise angular cuts from 45° to 135°
without changing the dimension set on the cross-cut fence. The angle is set via a digital indicator and the au-
tomatic length compensation via a grid curve made of stainless steel.
To use the Super Gehrfix I it is mandatory to use a saw blade with a thickness of 3.2 mm.
Figure 72: Super Gehrfix II
20.5.1
Features
•
Allows infinite adjustment of the mitre angle
•
Battery-operated digital indicator included
•
Infinitely adjustable and readable to 0.1
•
Fixing points for 90° angles at the front and rear of the cross slide
•
Automatic length compensation via grid curve
•
Setting accuracy: 1/100°
•
Can be combined with the standard cross-cut fence or the optional Tele-Digit
•
Art. No.: 4303
For mitre cuts, the cross-cut fence (L) must always rest on the support rail (5) .
