BA_PH_245-10_EN_13-22.docx
55
19.2
Lubrication Plan
Figure 54: Lubrication points on the machine
Figure 55: Central lubrication
To keep the machine parts always clean and in perfect condition, excess and/or old grease must
be wiped off at the outlet points of all existing grease nipples and other guiding elements!
Standard Version
Pos. Lubrication Point
Access
Lubrication Interval / Dosage
1
Milling spindle bearing
(top)
Move the spindle all the way up and
remove the insert rings or table slider
monthly / 2 grease shots
2
Milling spindle bearing
(bottom)
Open front service door
monthly / 2 grease shots
3
Height adjustment bearing
(top)
Open front service door
monthly / 2 grease shots
4
Height adjustment bearing
(bottom)
Open front service door
monthly / 2 grease shots
5
Chain system of the
height adjustment
Open front service door
monthly / lightly oil
6
Swivel segment guides
3
(both sides)
Access from above, before
remove insert rings / table slider
weekly / lubricate with fine oil
With Central Lubrication (Option)
Pos. Lubrication Point
Access
Lubrication Interval / Dosage
1
Milling spindle bearing
(top)
Move the spindle all the way up and
remove the insert rings or table slider
monthly / 2 grease shots
6
Swivel segment guides
3
(both sides)
Access from above, before
remove insert rings / table slider
weekly / lubricate with fine oil
In addition to the lubrication plan, please also refer to the section
“Maintenance Plan”
.
3
Remove resin and wood residues from the swivel segments once a week.
1
6
4
2
5
3
