BA_PH_245-10_EN_13-22.docx
12
3.6
Included Components
•
Milling fence type 215 with manual total and partial adjustment and suction nozzle
•
Milling protection and pressure device Type 1629 GAMMA V
•
Dial gauges in the handwheels for height and tilt adjustment
•
Second suction nozzle under the table Ø 120 mm
•
Milling spindle Ø 30 mm with quick clamping nut
•
Ring fence TAPOA Type 1639 for curved millings
•
Cutter quick clamping device
•
Finely planed cast iron table
•
Hexagonal pin spanner SW4
•
Hexagonal pin spanner SW5
•
Push handle Type 2390
•
Machine socket
•
Grease gun
3.7
Optional Accessories
•
Smooth-running, extendable frame support up to approx. 892 mm from the milling spindle centre
•
Machine access control via RFID key system TM 100 with personalised keys
•
Milling fence type 216 with LCD display for indicating the total fence
•
Milling spindles
Ø 35 mm / 40 mm / 50 mm / 1¼“ (not retrofittable)
•
Power feeder types "PV84" and "VARIOMATIC 4 N" and consoles
•
Single and double-sided table top extensions with frame support
•
Milling protection and pressure device type 1624
“
CENTREX
”
•
Hydraulic swivel-away device for milling fence
•
Tenoning and slotting device type
“
1376
”
and matching protective cover
“
1641
”
•
Integral fence plates for fence type 216
•
Patented PANHANS table slide
•
Kickback guard type
“
1648
”
•
Central lubrication
•
Safety rulers
•
Turntable
Further optional table systems, milling fences, tool quick-change systems, milling spindles, tenoning and slot-
ting devices, feed-units and other special accessories can be found in chapter
In addition, you can order accessories and spare parts in our online shop
