Panerai L'ASTRONOMO LUMINOR 1950 TOURBILLON EQUATION OF..., Instructions For Use Manual

Page: 15 / 86

26
and the haute horlogerie finish of the bridges and the plate to be admired.
Engraved on the back are the Tribute to Galileo Galilei inscription, the material, the
maximum depth of use, the individual identification number of the watch and the
name of the city with the geographical coordinates of the specific address chosen
by customer. The case number is engraved on the case between the lugs at 6
o’clock. The water-resistance of your watch is guaranteed to a pressure of 10 bar,
which corresponds to the hydrostatic pressure exerted by a column of water on 1
square centimetre at a depth of 100 metres under normal conditions. In these
circumstances the watch is therefore water-resistant to a depth of 100 metres.
T
HE DIAL
The dial is the characteristic Panerai sandwich type, consisting of two
superimposed plates, the upper one being perforated with numerals and hour
markers, while the lower one is covered with a layer of luminous material.
T
HE STRAP
The alligator strap is made from selected skins using the central part of the
animal, where the smoothest and most evenly shaped scales are found. It is
closed by an adjustable buckle, personalised Panerai.
T
HE MOVEMENT
Hand-wound mechanical, Panerai calibre P.2005/G, completely created by
Panerai, diameter 16¼ lignes, thickness 11.04 mm, 46 jewels, power reserve
of 4 days, 3 spring barrels in series, Glucydur
® balance, 28,800 vibrations/hour
(equivalent to 4 Hz). KIF Parechoc ® anti shock device, 375 components.
Functions: hours, minutes, small seconds, date, month indicator, equation of
time, sunrise and sunset times, power reserve indicator, sky map,
summer/winter time (upon request in the city for which the movement has
been set up), tourbillon.
Officine Panerai is not the owner of the trademarks Glucydur ® and KIF Parechoc ® .
INSTRUCTIONS FOR USING
L’ASTRONOMO - LUMINOR 1950
TOURBILLON EQUATION OF TIME
W
INDING THE WATCH
1. Raise the lever of the device protecting the winding crown
(A)
and, keeping
the winding crown
(B)
in the initial position, that is, without pulling it out
(position 0)
, turn it clockwise until the power reserve indicator on the back
reaches the fully-wound position indicated by the number 4.
2. Close the lever of the device protecting the winding crown
(A)
.
S
ETTING THE TIME
1. Raise the lever of the device protecting the winding crown
(A)
and pull out
the winding crown to the second click
(position 2)
.
2. Set the correct time by moving the minute hand
(D)
either clockwise or anti-
clockwise.
0
2
1
27
A
D
G
B
F
I
C
E
K
J
H
P
O
N