SMARTZONE UPS INSTALLATION MANUAL
85
Appendix
E: What’s Included: 10-20kVA VRLA 3-
Phase UPS (U10N32V, U10S32V, U15N32V,
U15S32V, U20N32V, U20S32V)
UPS Box
•
10-20kVA UPS depending on the UPS SKU ordered [U10N32V, U10S32V,
U15N32V, U15S32V, U20N32V, U20S32V] (1 unit)
•
3U UPS Front Faceplate (1 piece)
•
Tower Mount Kit (6 pieces)
•
Rack Mounting Brackets (2 pieces)
•
Safety Warning Sheet (1 sheet)
•
Selection Guide (1 booklet)
•
DB9 to DB9 RS232 1.5M Serial Cable (1 cable)
•
USB-1 to USB-B 1.2M Serial Cable (1 cable)
•
DB15M to DB15F Parallel Cable (1 cable)
•
4-pin EPO Plug with shorting wire installed (1 piece)
•
Rack Rail Mounting Kit [URMKIT2] (1 kit)
o
Left Slide Rail (1 rail mechanism)
o
Right Slide Rail (1 rail mechanism)
o
Phillips Pan Head M5x12 Screw (12 screws)
o
Phillips Hex Head M5x25 Screw (4 screws)
o
M5x25 Cage Nut (4 cage nuts)
o
Rail Installation Sheet (1 sheet)
•
SJ1 Bus Bar Jumpers Installed (3 jumpers)
•
SJ2 Bus Bar Jumper (1 jumper)
•
SJ5 Bus bar Jumper (1 jumper)
•
SJ8 Bus Bar Jumper (1 jumper)
•
SJ11 Bus Bar Jumper (1 jumper)
•
Non-insulated Ring Terminal (24 pieces)
•
Heat Shrink for Non-insulated Ring Terminal (24 pieces)
•
Hex Phillips Head M4x8 Jumper Screw (6 screws)
•
M32
Φ25mm Cable Gland (6 pieces)
•
Battery Cable
– Ring terminal to EBP Battery Connector (1 cable)
•
Intelligent Network Card Installed with two #0 Phillips screws [UNCP01]
– N
versions only
•
Intelligent Slot Cover Plate with two #0 Phillips screws
– S versions only
EBP Box
•
External Battery Pack unit [UVP480] (1 unit)
•
4U EBP Front Faceplate (1 piece)
