SMARTZONE UPS INSTALLATION MANUAL
21
Figure 20: Install the Rear Side of Rails
d. Tighten all 10x screws to secure the rail kit to the rack.
e. Install the 2x M5 cage nuts in the rack front equipment rail, with square holes.
One in each of the third locations above the top rail kit screw (see figure
below).
Figure 21: Install Cage Nuts in the Front Equipment Rail with Square
Holes
2. Install the mounting brackets:
a. Remove the 4x Phillips Flat Head M4x8 screws from the front of each side the
UPS and retain.
b. Align the mounting brackets with the screw holes on each side of the UPS and
secure with the previously removed Phillips Flat Head M4×8 screws (see
figure below).