SMARTZONE UPS INSTALLATION MANUAL
44
below).
Figure 64: Example of Snapping the Faceplate onto the Front of the UPS
e. Before placing the faceplate on the EBP unit, connect the Battery Cartridge
connectors (see figure below). Press each (4) connector tightly together to
ensure a proper connection.
f. The larger battery cartridges connect to connectors 1 and 3, each half of the
smaller battery cartridge connect to connectors 2 and 4.
Figure 65: Tower Kit for 3U Units
g. Place the EBP unit into its own tower kit to the right of the UPS. The EBP
signage does not rotate.
h. Install the faceplate on the EBP unit, by aligning the front panel latches with
the holes in the front of the unit and snapping the faceplate onto the front of
