© Panduit Corp. 2018
OPERATION MANUAL
PES400
ENGLISH
PES400: PA28981A01_01
Page: 34 of 46
4-2018
Figure 26 Microsoft Start Buttons
m.
Search for “Device Manager”, then expand “Ports (COM & LPT) to see COM
port assignments. [PES400 will be labeled as “Communication Port” or “USB
to Serial Adapter Port” when USB to Serial Adapter Cable is used.]
n.
Type in number of copies needed.
o.
After confirming the PES400 LCD screen is in “Ready” state and the
appropriate plate parts are loaded into the Feeder, Click ‘OK’ to send the
print job to the embosser.
4.2.14 Embossing Plates
a.
The production cycle finishes with the unloading of the plate on the left of
the Embosser. If the cycle is error free, the Embosser returns to the initial
READY state.
b.
If errors have occurred during the cycle, the machine will signal the error
code on the display and will still unload the plate before stopping; the
incorrect plate must be removed manually.
c.
Embosser will run one additional plate from print job after error is cleared.
d.
Please refer to the section on [
Error Codes
] for a description of the errors
that can arise.
e.
Verify the embossing height is correct and plate is flat. To correct, see
Embossing Force Adjustment, Sec. 4.3 below.
