© Panduit Corp. 2018
OPERATION MANUAL
PES400
ENGLISH
PES400: PA28981A01_01
Page: 1 of 46
4-2018
1. SETUP and INSTALLATION GUIDE
1.1 Unpacking
CAUTION
CAUTION! HEAVY OBJECT
FOUR PERSON LIFT REQUIRED
THE MACHINE & CRATE WEIGHS
210 lbs.
(95 Kg).
The Dimensions are: 33” (830 mm) X 29” (730 mm) X 24” (600 mm).
All movement of the machine and crate should be done by a
forklift; or by at least
four
persons, as the gross weight is approx.
210 lbs. (95 Kg).
•
The PES400 system is delivered in a wooden case.
•
Insure that facility doors, lifts, hoists, etc. are adequately sized to handle the crate and
machine when selecting an installation site.
Dismantle the case, with the following procedure:
•
Unscrew the side
upper screws to
remove the top
cover.
•
Remove the
accessories:
cables,
documentation, etc.
•
Remove the top
polyurethane shell.
•
Unscrew the
bottom screws to
remove the side
cover.
•
Extract the machine
from the bottom
polyurethane shell
(using at least
four
persons).
•
Remove the plastic
wrap from machine.
It is advisable to keep the box, the pallet and the protective materials for possible reuse.
NOTE: In addition to the machine, the components shown and listed below are included
with the PES400.
1.2 Checking the Accessories
Before installing the machine, check that all the accessories are present and that none
have been damaged during transport. If any single element has been damaged the
general operation of the machine can be compromised. The following items are supplied
with the Embosser:
