INSTRUCTIONS CM408F
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 10 of 24
Cable Management Panel and L-Retainers
For precise adjustment of cable management channel, loosen (2) #12-24 hex head screws at top of channel and (2) #12-24 hex head screws
at bottom of channel using 5/16” socket. Adjust channel position and retighten (4) #12-24 hex head screws. For large adjustments, remove
(4) #12-24 screws securing channel to cabinet frame, reposition channel, and secure cable management channel with (4) #12-24 hex head
screws as shown.
-CMSRC2
bend radius control clip can be installed in any of (6) indicated locations with (2) #12-24 Phillips screws as shown.
-Cable Management L-Retainers
are to be installed where desired by inserting the tab on the rear of the L-Retainer into any keyed mounting
slot located on the cable management panel and then sliding downward while pulling release tab forward, as shown. Pull release tab and
reverse the process to remove L-Retainers.
Loosen (2) #12-24 Hex
Head Screws for precise
bracket adjustment
(use 5/16” socket)
Loosen (2) #12-24 Hex
Head Screws for precise
bracket adjustment
(use 5/16” socket)
Cable Management
Panel
Cable Management
L-Retainer
(installed)
Keyed
Mounting
Slot
Release Tab
CMSRC2
(2) #12-24 Phillips
Screws
CMSRC2
Mounting
Locations
(6 Places)
