OmniStream
36
Configuring OmniStream Devices
12. Set the Multicast Address to match the video Destination IP and Port from the encoder.
e.g.
Session 1 from the
OmniStream 112.
13. Scroll down to Input 3.
14. Enter the IP and Port from the audio source stream to be routed to HDMI OUT 1.
e.g.
Session 3 from the
OmniStream 112.
15. Repeat for Session 2 (Video for HDMI OUT 2) and Session 4 (HDMI OUT 2 and analog audio) on the OmniStream
dual channel decoders.
16. Repeat steps 10 through 15 for all decoders.
NOTE:
If the OmniStream devices will be used in a video wall, open the HDMI OUTPUT tab and scroll to
the under the Video section and select the slider to enable Video Wall. Select Full Screen from the Stretch/
Crop Mode drop down menu under the Video section. No other settings need to be chosen at this time.
View the
section for configuration.
