OmniStream
6
Initial connections can be done without installing the devices in their final locations. Have at least one source and
display available to ensure video is passing between OmniStream devices. It is recommended these steps be
followed in the order they are written.
1. Connect all devices to the network switch using a CAT5e or higher cable. OmniStream devices will need to be
plugged into the PoE ports.
2. Have at least one source and display ready to connect to any of the OmniStream devices.
3. Once all the devices are connected to the network switch, connect the switch power supply to the power strip.
4. *Optional* If using the AT-OMNI-311, connect the USB B to USB A cable to the USB port of the PC, that will
provide the 5V power.
5. *Optional* If using the AT-OMNI-324, connect the power supply from the unit to the power strip.
6. *Optional* If using the AT-VGW-HW, connect it to the network switch.
7. *Optional* Connect the power supply to the AT-VGW-HW and power strip.
Connections
