OmniStream
34
6. Scroll down to the Audio section.
7. Notate the Audio IP and Port or type in a new IP/port. The audio IP and port will differ from the video settings,
this allows audio to be routed independently from the video. It is best to have the Destination UDP Port different
than the video. So if video is 1000, use 1100 for the audio.
8. Repeat this step for Session 2 if using a dual channel encoder.
NOTE:
If using AES67 audio routing, be sure to select the Enable AES67 slider so that it is green.
The AES67 audio stream will use the IP and Port from step 3.
NOTE:
There will be extra sessions listed on the encoders, these are for redundancy. View the
OmniStream manuals to go over redundancy.
NOTE:
Start with Session
1 and repeat for all the
sessions.
NOTE:
By default, the AT-
OMNI-238 subscribes to
streams in the 239.69.0.0/16
subnet.
Configuring OmniStream Devices
