OmniStream
33
2. Select the Session tab.
3. For the initial configuration to make sure all things are set up to display audio and video to other devices, only the
Destination IP Address and UDP Port fields are required. Scroll down to the Video section first.
4. Velocity will automatically assign an IP address and UDP port, notate the Video IP and Port or if preferred, type in
a new multicast IP and Port.
5. OPTIONAL: If the source is HDCP protected, then enable the Scrambling toggle. The toggle will turn green
when enabled. Then, specify the scrambling key in the Key field. Both the encoder and decoder must use the
same key.
NOTE:
Start with Session
1 and repeat for all the
sessions.
Configuring OmniStream Devices
