OmniStream
32
Configuring OmniStream Devices
Once all devices are up to date, they can be configured.
If labeling devices, the IP address can be found on the device list, next to the MAC address. If the MAC address was
not noted, the IDENTIFY button can be used within the interface discussed in this section.
1. Select an encoder (AT-OMNI-11X), either from the
Unassigned list
or the name link in the
device list
. This will open
the encoder’s interface to the Info tab.
NOTE:
Scroll to the bottom to find the IDENTIFY button, pressing it will blink the front LEDs of the
currently selected OmniStream encoder.
