22
SECURITy-SERVICE SySTEm PAnDoRA lIGhT PRo
Saving changes:
The system will return to the programming level №0 after pairing. Turn on the ignition to
automatically save the settings and exit the programming mode.
ConTRol oVER ThE SySTEm
Arming
The system monitors all security zones, locks doors and block the engine when it is armed. If one of the
security zones is triggered, the system saves all information in non-volatile memory, activate alarm or
warning mode and notifies an owner. If the engine is running when the system is armed and one of the
zones is triggered, the system stops the engine. An arming procedure, alarm and warning modes are
accompanied by sound and light signals.
The system makes one short sound signal and one flash of the turn lights when arming. If a security
zone is triggered when arming, the system will sound 4 beeps instead of 1, turn signals will flash 4 times.
The system turn on sound and turn lights signalization for 30 seconds when it is in alarm mode. you
can cancel the signals ahead of time by an arming or disarming command.
The system makes 1 light and 3 sound signals when it is in warning mode.
If one of the zones fails, the system forcibly turns off this zone. If a switch triggers more than 9
times in a row, it will be disabled until the next arming. The shock/tilt/motion sensor is temporarily
deactivated for 15 sec. if it has been triggered more than 3 times in a row.
To arm the system when the ignition is off, use one of the methods described below. The system
will confirm the command with 1 short sound signal and 1 flash of turn indicators.
doors are locking
system is arming
SLAVE
HANDS FREE
PANDORA BT
1x /1x
/1x
SLAVE
HANDS FREE
MOBILE APP
