25
USER mAnUAl
HandsFree mode
move toward the vehicle with a remote tag (or a paired mobile phone) .
noTE!
a
ddiTiONal
sETTiNgs
arE
rEquirEd
fOr
usiNg
ThE
h
aNds
f
rEE
mOdE
wiTh
a
mObilE
phONE
.
VALET button
Enter the ”Secret PIN-code” (see the ”Emergency disarming using the VALET button” section).
Unlocking a trunk
The system allows you to independently unlock the trunk, no matter if the system is armed or not.
If the system is armed when this action is performed, the trunk zone, shock and supplementary sensors
will be disabled. All the other security zones will remain armed. If the trunk is not opened in 15 seconds
after sending the ‘Unlock a trunk’ command, the system will enable the sensors and arm the trunk
security zone. It will be confirmed with a single flash of turn lights.
To unlock a trunk, use one of the methods described below.
Remote control
To unlock a trunk, press the
button on the remote control and hold it for 1 second (until a sound or
vibro signal of the remote control) when you are in the radio coverage zone.
Mobile application
open the mobile application. When the system is online(you are in the radio coverage area), press and
hold the
button on the control panel until the scale is fully loaded.
SLAVE mode
This mode allows unlocking a trunk using special analog inputs or digital connections to a car.
To disarm the system, shortly press the “Unlock a trunk” button on an original remote control or use a
sensor/button on a trunk (for cars with an intelligent access system).
Locking/unlocking doors when ignition is on
The system allows you to lock and unlock doors when ignition is on. To do this, use one of the
methods described below.
Remote control
Press the
button to lock doors or the
button to unlock doors when you are in the radio
coverage zone.
Mobile application
open the mobile application. When the system is online (you are in the radio coverage area), press and
hold the button to lock doors or the button to unlock doors on the control panel until the scale is
fully loaded.
