32
SECURITy-SERVICE SySTEm PAnDoRA lIGhT PRo
•
ENTER THE FOURTH DIGIT
• Enter the fourth digit of the code using the VALET button. Press the button
the number of times equal to the fourth digit. Pauses between presses should not exceed 1 second. Each
pressing will be confirmed with an orange lED indicator flash. The correct input will be confirmed with
the series of green and red flashes of the lED indicator.
- If the input was correct, the system will be disarmed.
- If the input was incorrect, it will be indicated with a long red flash of the lED indicator and the system will
stay in previous state. new input can be attempted after 5 seconds.
- If the system was disarmed and the ignition was off, it will enter the programming mode after entering
the correct input.
Deactivating/Activating immobilizer radio tags
AtteNtIoN! I
t
Is
hIGhly
RecommeNded
to
chANGe
the
fActoRy
pReset
of
the
“s
eRvIce
pIN-
code
”
foR
ImpRovING
secuRIty
of
the
system
.
Write down or remember the “Service PIN-code”
To deactivate immobilizer radio tags, enter the programming level № 15 (the system must be in the
programming mode). Enter the ‘Secret PIn-code’ to disable radio tags or press the VAlET button once
to enable the tags.
Enter the “Service PIN-code” to enter the programming mode (the factory preset of the service PIN-
code is ‘1-1-1-1’). you can enter the code only if the base unit is powered, the ignition is off, the system
is disarmed and the service mode is switched off. If you don’t know the ‘Service PIn-code’, you can enter
the programming mode using the ‘Secret PIn-code’ written on the owner’s card. After entering the
programming mode, press the VAlET button 15 times. Green color of the lED indicator means the radio
tags are enabled, red color means the radio tags are disabled.
Deactivate radio tags
The lED indicator will be green after entering the programming level. The system will wait for entering
the ‘Secret PIn-code’. Enter the ‘Secret PIn-code’ that is written on the owner’s plastic card. The system
will confirm deactivating with two sound signals of the siren and a long red lED flash. After that, the
system will return to the programming menu.
