31
USER mAnUAl
ConTRol oVER ThE SySTEm In CASE oF EmERGEnCy
Emergency disarming
In case you cannot disarm the system using a remote control
or immobilizer tag, the ‘Secret PIn-code’ can be used. The ‘Secret
PIn-code’ is written on the owner’s card under the protective
layer. The code must be entered only when the base unit is
powered and the ignition is off. The PIn-code can be entered
using the external or located on the base unit VAlET button.
The digits input and correct input is indicated by the external or
located on the base unit lED indicator.
AtteNtIoN! m
Ake
suRe
thAt
the
pRotectIve
lAyeR
oN
the
oWNeR
’
s
plAstIc
cARd
Is
INtAct
AfteR
the
INstAllAtIoN
of
the
system
. t
he
plAstIc
cARd
hold
the
‘s
ecRet
pIN-
code
’.
AtteNtIoN! R
emove
the
pRotectIve
lAyeR
cARefully
. d
o
Not
use
ANy
shARp
objects
to
AvoId
dAmAGING
of
hIddeN
INfoRmAtIoN
uNdeR
the
pRotectIve
lAyeR
.
Entering the PIN-code:
•
ENTER THE FIRST DIGIT
• Press the button the number of times equal to the first digit. Pauses between
presses should not exceed 1 second. Each pressing will be confirmed with an orange lED indicator flash.
Pause for more than 1 second and a red lED indicator flash confirm
the input of the first digit. Then you can enter the next digit.
•
ENTER THE SECOND DIGIT
• Press the button the number of times
equal to the second digit. Pauses between presses should not
exceed 1 second. Each pressing will be confirmed with an orange
lED indicator flash. Pause for more than 1 second and a red lED
indicator flash confirm the input of the second digit. Then you can
enter the next digit.
•
ENTER THE THIRD DIGIT
• Press the button the number of times,
equals to the third digit. Pauses between presses should not
exceed 1 second. Each pressing will be confirmed with an orange
lED indicator flash. Pause for more than 1 second and a red lED
indicator flash confirm the input of the third digit. Then you can
enter the next digit.
LED indicator
VALET button
2-2-2-2
PIN
